Hello Everyone,
I have come to this community to learn about everyone's CAD CAM programming needs, and to shed some light on using BobCAD. If there are any topics you would like covered just ask.
Thanks
Al DePoalo
BobCAM Team Leader
How to use the software:
This video walks through the steps of opening a DXF file and moving the part to zero.
http://screencast.com/t/gsp2dmGlrWThis video walks you through the steps of cleaning up geometry and using layers to organize your part.
http://screencast.com/t/DmCb37GxcKneThis video walks you through the steps of drilling and tapping the holes for this sample drawing.
http://screencast.com/t/MobJSgYyThis video walks you through the steps of cutting the slots for this drawing. We are using the profile feature and contour ramping, which will ramp down to cut the slot out.
http://screencast.com/t/5nAZynCXsLjThis video walks through the steps of cutting the pockets. I show how you can use top of job to change where the tool starts cutting from. Using top of part settings is great for when you are cutting a pocket inside a pocket. This way you don’t cut air.
http://screencast.com/t/2f5ygHtwNAVThis video walks through the steps of cleaning up the walls of the pockets. I use the profile feature with side roughing. This allows the tool to walk into the wall and clear any extra stock that might have been left over.
http://screencast.com/t/Gs1OOnJGLEThis video walks through the steps of simulating your program and posting code.
http://screencast.com/t/8XhegHm5p8uQuestion: If my simulation show the tools cutting in the wrong order, how do I change that?
Answer: The machining order can be set to ” individual tool ” or ” individual Feature”
Watch this video to learn more:
http://screencast.com/t/PA4z4205Question: Why does the software call more than one tool when drilling a hole. What if I only want to call a drill, instead of a center drill, a drill and a chamfer tool?
Answer: We use tool patters to optimize hole making processes. The idea is to call and program all the tools need to make the kind of hole you want to make. You can customize the patters to fit your needs. Watch this video to learn how:
http://screencast.com/t/0vkwZ8WgFd