Hello Guest it is March 29, 2024, 01:16:43 AM

Author Topic: Mitsubishi MR-J2-40A with Galil icm 1900 wiring help needed!  (Read 11294 times)

0 Members and 1 Guest are viewing this topic.

Re: Mitsubishi MR-J2-40A with Galil icm 1900 wiring help needed!
« Reply #10 on: November 06, 2011, 05:22:52 PM »
Sorry my fault had the plug the wrong way up compared to the diagram dooh!

Sorry, We're going to have to dock you 10 points for that. :-)
N.

Offline cnc-it

*
  •  153 153
    • View Profile
Re: Mitsubishi MR-J2-40A with Galil icm 1900 wiring help needed!
« Reply #11 on: November 07, 2011, 03:24:49 AM »
My bad  ;D

J
Re: Mitsubishi MR-J2-40A with Galil icm 1900 wiring help needed!
« Reply #12 on: December 08, 2017, 05:11:38 AM »
sorry to bring this back from the dead, but im doing almost the same setup and im at a complete loss. I have DRO feedback when I spin the motor by hand, the drive is set to torque mode, but theres no movement. I hate these mitsu drives but im stuck with one for my Z axis. And mitsu wants 200$ for the software to plug into the drive instead of using the little 4 button menu. Ive tried hooking the TC and LG to the A and /A ports and nothing. My X and Y work great using Parker Aries stuff.