Hello Guest it is March 19, 2024, 02:36:12 AM

Author Topic: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion  (Read 134944 times)

0 Members and 1 Guest are viewing this topic.

Re: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion
« Reply #200 on: July 07, 2013, 09:04:16 PM »
HELLO

I need some direction.I have a dm4800 that just started acting out. It has graphic card issues (mc201b) ,which i just ordered.Now the spindle is stopping in mid cut,an theres a sound like thermo overloads pulling in and out   behind the drive boards and spindle drive.Can you give me some direction as to what to look for before i call a tech.
Re: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion
« Reply #201 on: July 17, 2013, 10:56:54 PM »
hello

I  have a DM 4500.The lcd screen wont turn on, and the boards on the side of the power supply are showing red on the leds insted of green does this mean the power supply is gone...Any help would be great
Re: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion
« Reply #202 on: February 13, 2016, 03:48:38 PM »
hello

I  have a DM 4500.The lcd screen wont turn on, and the boards on the side of the power supply are showing red on the leds insted of green does this mean the power supply is gone...Any help would be great

Sorry, I dont know anything about the DM4800.   This is a retrofit bud :)
Re: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion
« Reply #203 on: February 13, 2016, 03:52:44 PM »
This project is for sale.   Everything in the build is included minus the X Y Z Servo Systems.      The PC with Mach installed, the display control cabinet, the fully functional ATC and controls, coolent system, spindle motor and drive and of course the 12000lb machine.   Like I said everything in the build minus the servo systems.   The servos have been pulled and are in use in a different machine.   

Please make me an offer.   

Thanks
JH