Hello Guest it is March 29, 2024, 07:11:43 AM

Author Topic: can't see lathe toolpath in mach  (Read 3454 times)

0 Members and 1 Guest are viewing this topic.

can't see lathe toolpath in mach
« on: July 08, 2011, 08:51:11 AM »
Hi,

This is the first time I am designing a lathe screen. Seem to have stuck at a point which never gave me trouble with Mill screens. I add a toolpath, assign it's direction X-Z for lathe, save the file and when I open the screen in Mach3 then the toolpath is not there. Am I missing something? I have used V1.44 and V1.51 with the same results.

Zafar
Re: can't see lathe toolpath in mach
« Reply #1 on: July 09, 2011, 01:00:48 AM »
I used swap layers and that salved the problem.

Zafar