Hello Guest it is March 29, 2024, 10:04:02 AM

Author Topic: hex wizard  (Read 3493 times)

0 Members and 1 Guest are viewing this topic.

hex wizard
« on: January 09, 2011, 10:01:00 AM »
i am doing a job that has basic operations of milling but on 3 of the holes it requires a hex bolt to be flush with the surface. to do this i have to make another program in bobcad at the postions of the holes and let it be done. pain in the rear to put and take the parts just for this. is there somthing i'm missing in wizzards so that operation can be added to the main program? thanks tom

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: hex wizard
« Reply #1 on: January 09, 2011, 10:40:45 AM »
The wizards allow for individual machining tasks to be done.
I don't use Bobcad, it's a cam program, and  figured that you should not even need to use a wizard to define the machining and generate the code.
RICH
Re: hex wizard
« Reply #2 on: January 09, 2011, 10:53:56 AM »
it is so easy to use the wizzards and i'm new to bobcad, so i'll just dive into it some more. need more practice for it is quite a learing curve.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: hex wizard
« Reply #3 on: January 09, 2011, 11:38:24 AM »
Quote
for it is quite a learing curve
May as well get used to it since it's never ending..... ;)
RICH
Re: hex wizard
« Reply #4 on: January 09, 2011, 12:35:07 PM »
lol you sure got that right.