when you set the 1st four, analogs (starting at lowest pin number), for analog in, then if you will look at the OEM "PoKeys.set" screen set, on the PoKeys page in that screen set, you will see 4 analog input DROS that should change value as you turn yoru pots. NOTE: READ the Flash HELP by pushing the HELP button in the PK config dialog of the plugin!!!
then in Brains, or Macro pump, your choice. Map the analog UserDROs to the funcs you want.
See "Brains users guide" in the member docs section further down. in this forum......
scott