Hello Guest it is March 28, 2024, 05:50:32 PM

Author Topic: Post for Mach3  (Read 9682 times)

0 Members and 1 Guest are viewing this topic.

Post for Mach3
« on: November 08, 2010, 10:03:53 AM »
I', looking for the post to run my Master Cam MR2 (10.2.2.31) also says Ver. 0.17.1.167. I would like to do my drawning in my autocad and run through my Master Cam which I use in my shop. Any help would be good.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Post for Mach3
« Reply #1 on: December 04, 2010, 08:13:05 AM »
Quote
May I express my master no information offline.

Don't understand the reply....sort of like a cypher. ???
RICH
« Last Edit: December 04, 2010, 08:16:23 AM by RICH »

Offline DaOne

*
  •  236 236
    • View Profile
Re: Post for Mach3
« Reply #2 on: December 04, 2010, 05:03:18 PM »
What version of Mastercam? X - X5, lathe or mill post? MR2 doesn't tell me much. Thats just the maintenance release.  I have been working on a lathe post for X5
Re: Post for Mach3
« Reply #3 on: March 28, 2012, 03:49:41 PM »
i used mastercam 14 and i need to know what post to use because tha mpfan make tha machine loca loca

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Post for Mach3
« Reply #4 on: March 28, 2012, 06:42:16 PM »
Quote
because tha mpfan

Don't understand.. ???

RICH

Offline DaOne

*
  •  236 236
    • View Profile
Re: Post for Mach3
« Reply #5 on: March 28, 2012, 07:00:13 PM »
Mpfan is a generic post for Mastercam.  If you purchased Mastercam you should have no problem getting a post from your dealer.
Re: Post for Mach3
« Reply #6 on: March 31, 2012, 09:53:51 AM »
ok but my Q WAS which post I need to ask for

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Post for Mach3
« Reply #7 on: March 31, 2012, 12:23:39 PM »
Well just guessing here BUT if you are using MACH3 I would ASK for a post for MACH3.

Just a thought, (;-) TP

Re: Post for Mach3
« Reply #8 on: April 01, 2012, 06:28:19 PM »
I think a regular FANUC post would work.(already in mastercam)

Will probably have to make some changes in the header file but the code will work.


Jeff