Hello Guest it is March 28, 2024, 01:42:48 PM

Author Topic: Mach seems to be cutting on the wrong side??? Any ideas?  (Read 10866 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach seems to be cutting on the wrong side??? Any ideas?
« Reply #20 on: July 18, 2010, 07:54:46 AM »
Just wanting to make sure, is the variance between parts or within one part?
Hood
Re: Mach seems to be cutting on the wrong side??? Any ideas?
« Reply #21 on: July 18, 2010, 05:18:50 PM »
It seems to between parts Im starting another batch next week so ill see how they come out

Thanks

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach seems to be cutting on the wrong side??? Any ideas?
« Reply #22 on: July 18, 2010, 05:57:00 PM »
Parts should really be identical or very close to it if it is a machine issue as the slides should be moving the same way so backlash etc should be the same from one part to the next.
Because yours are different then  it sounds more like  an electrical issue, bad pulse etc.
Hood
Re: Mach seems to be cutting on the wrong side??? Any ideas?
« Reply #23 on: July 19, 2010, 04:22:51 PM »
Ok hood ill let you know how the next batch go

Thanks for all your help