MPG pins 1 and 2
>> On the main PK cfg page, choose where the encoder from pins 1/2 (usually Encoder1 if only one),
is mapped to USUALLY machs encoder 4 which is MPG1, make sure you enable the MPG in Ports and Pins.
Matrix keyboard 3-7 for columns and 14-17 for rows
>> On PK cfg page, you map your Col/Rows to the same pins you map the Matrix Keys, it give you a start range of User LEDs
to use, you will need to write some VB in your Macro pump, OR, Brians, or combination of the two.
LED matrix 9-10-11 these are LED's built in on switches in Keymatrix
>> There is a Matrix LED cfg button on the main PK page, press it, and you can see how to set up the matrix LEDs, and the start range
of the User LEDs that you want to use to represent your external LEDs, you will need to map them out via Macropump and/or brains as above.
LCD 4x20 on pins 23-26 28-30
>> You will HAVE to move your LCD to the "Secondary" LCD position, since the first position conflicts with some other functions.
You will have to write to it via the plugin cng quick pics, or set your own User Lables and write to the lables via VB script.
Analog in for S and F override on pins 43 and 44
>> these once picked, will map to Old serial modbus registers 124-127, you will need to use brains to remap them to what you want, OR,
they also drop vals to User DROS in the Stock PK OEM screen that comes wiht the plugin.
What parts do I have to tick in PoKeys Cfg?
>> see above
Where do I do the keymapping for the keymatrix and LED mapping for the LED matrix?
>> see above
Make sure you have the LATEST Pk firmware/software update, and the Latest Mach3 Pokeys plugin Which you can also get off of Boris's site PoScope.com.
NOTE" the Pokeys installer will install a standard OEM version of a PK Mach3 profile and screens that you can use to test everything, READ the Help file that opens up when you push the HELP button.
scott