Hello Guest it is March 28, 2024, 01:07:46 PM

Author Topic: Changing image file  (Read 11465 times)

0 Members and 1 Guest are viewing this topic.

Changing image file
« on: March 16, 2010, 09:40:21 PM »
I cannot change the image file for either buttons or LEDs. If I double click in the field nothing happens. What am I missing?
Re: Changing image file
« Reply #1 on: March 16, 2010, 10:08:00 PM »
I am also unable to change LED properties, like color or blink
Re: Changing image file
« Reply #2 on: March 17, 2010, 04:01:33 AM »
Hi Ron,

how do select the element, what are your settings? When you select the item, does the frame appearance change?


Klaus
The brain isn't a soap, it doesn't shrink when used.
Re: Changing image file
« Reply #3 on: March 17, 2010, 08:12:06 AM »
I simply click on the element I want to edit. It then shows the black handles, and the property dialog fills up. I can change the OEM code, but none of the other properties. Ive tried clicking on both the name and the property, also double clicking each, and right clicking.

I just tried removing machscreen completely and reinstalling but it still works the same.
« Last Edit: March 17, 2010, 08:16:45 AM by Ron Ginger »
Re: Changing image file
« Reply #4 on: March 17, 2010, 08:49:17 AM »
Ron see the pic

Double click in the path box to set the path, another box will open

Phil
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable
Re: Changing image file
« Reply #5 on: March 17, 2010, 10:10:41 AM »
Thanks, but that is exactly what I am doing. It does not open the box to make an edit. The only field I can change is the OEM code. On LEDs I cannot change the image file or the color or the blink property. On buttons I cannot change the file.
Re: Changing image file
« Reply #6 on: March 17, 2010, 11:39:31 AM »
Hi Ron,

could you please send me your set file and tell me which element on what page you want to change the property.

EDIT: The easiest way is do a "project export".



Klaus
« Last Edit: March 17, 2010, 11:45:48 AM by Klaus1311 »
The brain isn't a soap, it doesn't shrink when used.
Re: Changing image file
« Reply #7 on: March 17, 2010, 11:57:39 AM »
This happens to any .set file I try- even the 1024.set
Re: Changing image file
« Reply #8 on: March 17, 2010, 12:23:42 PM »
Hi Ron,

I'm using version V1.40.a and it all works like it should.
Try to delete the registry entries. To do that finish MachScreen and start regedit. Move to HKEY_CURRENT_USER\Software\KD_soft and delete  the complete entry "MachScreen". The next time you start MachScreen it will take the default settings.


Klaus
The brain isn't a soap, it doesn't shrink when used.
Re: Changing image file
« Reply #9 on: March 17, 2010, 01:53:23 PM »
That did it!

Thanks for the help