Hello Guest it is March 28, 2024, 05:29:11 PM

Author Topic: Calling all post processors. ( Help me to help you )  (Read 189208 times)

0 Members and 1 Guest are viewing this topic.

Alphacam
« Reply #20 on: July 13, 2007, 10:21:16 PM »
Hi.

Anyone have a Postprocessor for Alphacam????

cheers

Frans

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Calling all post processors. ( Help me to help you )
« Reply #21 on: July 14, 2007, 02:31:39 AM »
Metric or inches, lathe or mill?

Graham.
Without engineers the world stops
Re: Calling all post processors. ( Help me to help you )
« Reply #22 on: September 17, 2007, 01:40:57 AM »
Hello

Please... :-\ Can Somebody share  a postprocessor for Featurecam v13 " MILL and METRIC version" 

Cheers

Chivo
Re: Calling all post processors. ( Help me to help you )
« Reply #23 on: November 20, 2007, 05:36:17 PM »
Does anyone have the post processor for StepMaster NC TM? Thanx!
mastercam V8 post processors.
« Reply #24 on: December 14, 2007, 08:55:38 PM »
Hi,
    Im a new user of MACH3 mill but an experienced user of mactercam V8.
Im looking to find anyone who has a post processor for Mastercam V8 that will
control 4 axis movement.

Thanks
           Adrian Nicholls
mastercam V8 post processors.
« Reply #25 on: December 14, 2007, 09:00:57 PM »

Hi,
    Im a new Mach3 user but an experienced mastercam V8 user. Does anyone have a working
post for mastercam V8 with 4 axis control?

Thanks
          Adrian Nicholls ???

Offline poppabear

*
  • *
  •  2,235 2,235
  • Briceville, TN, USA
    • View Profile
Re: Calling all post processors. ( Help me to help you )
« Reply #26 on: January 04, 2008, 04:45:39 PM »
Benny here are the three lates versions that go with OneCNC

I made one for
XR2 Mill 3-5 axis
XR2 Lathe 2 axis
XR2 Wire EDM (can be used for foam)

Scott
fun times

Offline LJJ

*
  •  2 2
    • View Profile
Re: Calling all post processors. ( Help me to help you )
« Reply #27 on: January 14, 2008, 03:32:03 PM »
I am trying to build a collection of all post processors for many CAM programs.
I was hoping if you had any I could use, you could upload them to this thread.
I will then host then in the new section here http://www.machsupport.com/cam.htm

Thanks for your help.


Benny



I have seup Sprut Cam 4.0 with Mach 3. I'm not an expert, so you may want to verify all the paramaters first, but It is working for me with my 3 axis mill and mach 3/Quantum.

Offline drut

*
  •  21 21
    • View Profile
Re: Calling all post processors. ( Help me to help you )
« Reply #28 on: January 15, 2008, 03:07:09 PM »
routout cnc 

many thanks

drut

Offline drut

*
  •  21 21
    • View Profile
Re: Calling all post processors. ( Help me to help you )
« Reply #29 on: January 15, 2008, 03:11:14 PM »
scrap that last post i miss understud, its been a long day

sorry

drut