Hello Guest it is March 28, 2024, 10:54:25 AM

Author Topic: G100 problem with 2 motors on Y axis  (Read 2739 times)

0 Members and 1 Guest are viewing this topic.

G100 problem with 2 motors on Y axis
« on: July 06, 2009, 04:00:16 AM »
Hi
I have a portal milling machine with Y axis driven by two step motors on each side. If i call it home, or jog manualy, all works ok. Both motors run.
Problem starts when i run any gcode part program, then only one of motors moves, second one stays motionless

Hope you understand, my english is poor

Thanks

Jerry