Hello Guest it is April 19, 2024, 07:12:48 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: moh_kushly  (Read 3992 times)

0 Members and 1 Guest are viewing this topic.

Offline KOSLI

*
  • 2 2
    • View Profile
moh_kushly
« on: March 20, 2009, 02:35:45 AM »
I
How do I reference the digital input #1 in the OEM triggers
I am using G100 controller

Logged

Offline Chaoticone

*
  • *
  • 5,624 5,624
  • Precision Chaos
    • View Profile
Re: moh_kushly
« Reply #1 on: March 20, 2009, 08:12:52 AM »
You will go to config., ports and pins, inputsignals, Oem Trigger and set the pin you want to use there. Then go to config., system hot keys and assign and oem number to the trigger.  See attached pics.

Brett
Logged
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline KOSLI

*
  • 2 2
    • View Profile
Re: moh_kushly
« Reply #2 on: March 21, 2009, 04:31:57 AM »
Thanks Chaoticone for help.    That exactly what i was missing.
But what about the Analouge inputs and outputs ,  Icant find  any place to configure them,   can you help please                
Logged

Offline Chaoticone

*
  • *
  • 5,624 5,624
  • Precision Chaos
    • View Profile
Re: moh_kushly
« Reply #3 on: March 21, 2009, 01:08:07 PM »
Look at the top of this page, support, documentation, G100 Set Up Guide. Some of the normal analog controlled features such as Feed Rate Override will not work with the G100. It was a hope at one time but never matured.

Brett
Logged
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Pages: 1   Go Up
« previous next »