Machsupport Forum

Mach Discussion => Mach Screens => Finished Screens => Topic started by: krsykes23 on January 28, 2017, 02:09:38 PM

Title: 3 Axis mill with ATC
Post by: krsykes23 on January 28, 2017, 02:09:38 PM

Here is the recently updated screenset for my 3 Axis Mill.  The Offsets screen should really be in 'Work in Progress' but thought I'd share it here.

I have to add a few bits to this screen but quite pleased with the results.

Title: Re: 3 Axis mill with ATC
Post by: Tweakie.CNC on January 29, 2017, 04:40:07 AM

Very nice work.

Just a thought...
The Emergency Stop may be a bit misleading to the inexperienced as a software polled EStop should never be relied on in an Emergency. The only true 'Emergency Stop' physically disconnects power to all parts of the machine (and if applicable automatically applies any brakes, locks, etc.).

Tweakie.

Title: Re: 3 Axis mill with ATC
Post by: krsykes23 on January 29, 2017, 04:47:49 AM

Point taken!  However, I don't think I've ever used the button as an actual e-stop in an emergency.  Merely for
resetting.  I have a physical e-stop next to the machine.

Title: Re: 3 Axis mill with ATC
Post by: Tweakie.CNC on January 29, 2017, 05:05:58 AM

Very nice looking machine as well - I think you have a set-up to be proud of there.

(Perhaps rename the on-screen button RESET ?  ;) )

Tweakie.

Title: Re: 3 Axis mill with ATC
Post by: wmgeorge on September 15, 2018, 01:01:44 PM

It needs a Reset, Cycle Start, Pause, Stop large buttons easy to see, and the Loading Code and etc does not need to be taking up so much screen.

Title: Re: 3 Axis mill with ATC
Post by: rasta on October 20, 2018, 03:07:09 AM

hi; thats a lovely screenset!

Title: Re: 3 Axis mill with ATC
Post by: krsykes23 on October 23, 2018, 10:15:40 AM

Thanks.  This screen has now been replaced with a much neater version.  I'll show the new version in the next few days.  I'm also considering making the
set available for a small fee.  This will include all the relevant .psd files and images.

Title: Re: 3 Axis mill with ATC
Post by: jdm033056 on October 23, 2018, 09:01:58 PM

I will be interested

Title: Re: 3 Axis mill with ATC
Post by: chiguy454 on December 07, 2018, 11:46:10 AM

I would be interested in seeing what your latest screen looks like!

Title: Re: 3 Axis mill with ATC
Post by: hacker77 on August 23, 2022, 09:57:56 PM

Where has this Screenset gone ? Any chance it's finished for purchase?