Machsupport Forum

General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: chrisjh on November 28, 2015, 06:58:19 PM

Title: Boring with Mach3
Post by: chrisjh on November 28, 2015, 06:58:19 PM

Hi,

My first attempt at boring with Mach3.

OD and ID profiles programmed with HSMWorks.  HSMWorks cannot handle boring on the far side of the centreline, so I had to post code for the near side of the centreline, then use NotePad to do a global search and replace for all values of "X" with "X-"

Worked a treat.

Material is PVC.  End product is an Ultrasonic transducer housing.

https://www.youtube.com/watch?v=Zxp-k4pQKTU

Title: Re: Boring with Mach3
Post by: Tweakie.CNC on November 29, 2015, 01:51:02 AM

Excellent work Chris.

Tweakie.