Machsupport Forum
General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: chl on March 30, 2007, 03:38:43 PM
-
Hi all i have done my modio controlled pendant ready....it seems to work fine.
Now i have to build my second machine ready so i can use my new remote :)
Some info about it
In program run mode ....single or auto
hold start button for 1 sec and program starts....(for safety reason)
hold stop button less than 1 sec pause the program
hold stop button more than 1 sec stops program
MPG is disable
Jog mode x-c axis
start button jog axis + with selected feedrate
stop button jog axis - with selected feedrate
if i turn feed knob to 150% then
start zero selecet axis and stop restore axis value (must hold down for 1 sec )
the mpg wheel has this values
if feedrate knob 0-6% then mpg is in stepmode 0.01mm
if feedrate knob 10-30% then mpg is in stepmode 0.10mm
if feedrate knob 40-100% then mpg is in Constant Velocity
cw and ccw mode
hold start for 1 sec starts spindle with 150rpm then
every push on start button step up spindle with 50 rpm and
every push on stop button less than 1 sec step down spindle with 50 rpm
Hold stop for more than 1 sec stops spindle
Screen button
Toggles the To Go screen
And Estop
stops all i hope ;)
Off = offline
mpg disable
Thats all ;)
A little video on the pendant
www.lcgl.se/video/mympg.wmv (http://www.lcgl.se/video/mympg.wmv)
My macropump file (http://www.lcgl.se/macropump.zip)
(http://www.lcgl.se/pics/mympg.jpg)
-
Very nice, how did you make the decals?
Hood
-
Hi i made the decal in ms paint and print it out....then i cut it out and laminati it.
-
nice idea, never thought of laminating, thanks for the tip.
Hood
-
Very nice, do you plan on selling any of these?
Brett
-
Hi...i have no plan to sell any ;)
-
Hi...i have no plan to sell any ;)
Yet
-
Where did you buy the case from? That looks very nice, I would buy one if you sold them!
-
Hi...the case is from http://www.elfa.se/elfa-bin/setpage.pl?http://www.elfa.se/elfa-bin/dyndok.pl?lang=se&dok=4699.htm
TBT-2/9002 black is the one i have..
Its has a very good size for a pendant.... :)
-
Awsom....
Any chance of posting a parts list, artwork, code and maybe a few pictures of the inside?
Steve
-
Hi all about my MPG its going to come on my cnc side i will do soon i hope.......
Its will be all there..
Part list
Pictures
Macropump file
-
That is one heck of a MPG!!!
Great job!!