Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: zafarsalam on August 27, 2012, 09:55:56 AM

Title: Turret Punches with Mach3
Post by: zafarsalam on August 27, 2012, 09:55:56 AM
Here are videos of two of the turret punch press we retrofitted in the last few months.

http://youtu.be/elpTUf00gZc
This is LVD fabri-center, 1988 model, with 33 station turret and 30 ton press.

http://youtu.be/lhOSqPSiClk
This one is LVD Shape Beta, 1994 model, with 15 station turret and 20 ton press.

Zafar
Title: Re: Turret Punches with Mach3
Post by: budman68 on August 27, 2012, 10:08:26 AM
Nice work!

Now puch out a few pairs of safety glasses for everyone, ok?  ;)

Thanks for sharing,
Dave
Title: Re: Turret Punches with Mach3
Post by: Hood on August 28, 2012, 04:38:28 PM
Nice work :)
Hood
Title: Re: Turret Punches with Mach3
Post by: bkp-cncinfo on April 30, 2016, 12:30:56 PM
I have a single station strippit super-ag machine retrofit with mach3 controls. are any special G-codes and M-codes available for nibbling circular pattern or holes on a grid or holes on a line with increment at certain angles. I know the math part but do not know how to code it to script to special m-g-code. Are any such codes available on line. Does Mach4 have any of this built it. like mach4-punch
Title: Re: Turret Punches with Mach3
Post by: zafarsalam on May 07, 2016, 03:23:46 AM
I have a single station strippit super-ag machine retrofit with mach3 controls. are any special G-codes and M-codes available for nibbling circular pattern or holes on a grid or holes on a line with increment at certain angles. I know the math part but do not know how to code it to script to special m-g-code. Are any such codes available on line. Does Mach4 have any of this built it. like mach4-punch

This can be done with M-code macros.