Machsupport Forum
Third party software and hardware support forums. => dspMC/IP Motion Controller => Topic started by: halkintool on February 09, 2009, 11:26:01 AM
-
My dspMC is capable of 8 Channels Analog Inputs, Range 0..5Volts, 14-bit Resolution. Im curious as to how i would utilize this through Mach3.
It would be ideal for me to be able to utilize some of these inputs in my macros, just wondering if its even possible?
-
the analog input data is stored in oem dros in mach. what hardware model do you have 7761 or 7761-Sx or 7761-Mx.
-
7761S, how do you access oem dros? can you assign a port/pin(input number) to the analog signal?
-
sorry, the analog inputs are only available in 7761-M. pls see the webpage www.vitalsystem.com/dspmc
Mach OEM DROs 1320..1327 are reserved for analog inputs. plugin should be v1.9 or later.
-
Gotcha. Ill have to do a little work around :)