Hello Guest it is March 28, 2024, 06:09:06 AM

Author Topic: MACRO- LATHE & MILL DRILLING MACROS m830 and m831  (Read 13397 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
MACRO- LATHE & MILL DRILLING MACROS m830 and m831
« on: June 26, 2010, 08:14:16 AM »
The attached file contains  peck drilling macros for the lathe and mill created by Melee.
There is a read me file which explains their use.
Since the referenced download location in the original thread is no longer working i thought i would post them here.
At least they will not get lost.

RICH
« Last Edit: October 21, 2010, 10:31:13 PM by RICH »

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: LATHE & MILL DRILLING MACROS m830 and m831
« Reply #1 on: June 26, 2010, 05:15:16 PM »
Thank you very much sir -  :)

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: LATHE & MILL DRILLING MACROS m830 and m831
« Reply #2 on: July 01, 2010, 10:23:57 AM »
Thanks Rich(;-),

 Preservation of code is Important. It saves having to recreate it again and again.

Maybe move them over to the Mach Tool Box ??

Re: MACRO- LATHE & MILL DRILLING MACROS m830 and m831
« Reply #3 on: May 14, 2015, 08:15:22 PM »
Cheers Rich!
Re: MACRO- LATHE & MILL DRILLING MACROS m830 and m831
« Reply #4 on: January 28, 2020, 12:13:12 PM »
Dear Rick,

I am plying with your m830 test program for lathe, but I'm getting error M830 parameters not found in GCode, and program stops. This happens when M830 maxis moves are done, then get error.

Can you please tell me what I'm doing wrong? I really need to establish pack drill, coz I have big problems with chips when drilling Aluminium.

Thank you

Gasper