HillBilly's BOB

[HillBilly]

I made some extra boards if anybody is interested. 



$79usd board with 7407 buffers and 4n25 optos.(24v input standard)
Solid state relay outputs cost more but can turn on one LARGE contactor.

(Price was changed from $69 to $79 in late 2008 when more boards were made and the production price had increased.)

Thanks,
Darek

[HillBilly]

Here is a spindle speed module before potting and one in action.




Thanks Benny for teaching me how to hot link!

Darek

[ynneb]

Thanks Benny for teaching me how to hot link!

I wasnt aware that I did, but Ill take credit anyway

Your boards look nice and clean. I hope you do well selling them.

[HillBilly]

Benny,

You did, see where you edited my first post. Thanks for the compliment on the boards. So far the couple I have sold are for retrofitting the Bridgeport BOSS stepper machines. It gives these great old machines a new brain and is what inspired me to make the boards.

Darek 

[namnp2007]

Dear HillBilly.
Pls. kindly quote me about your  board, with IC's.
What's your e-mail address?
Waiting for your soon.
Nam

[letray]

Will these boards work with Yaskawa SGDH Sigma-II servo drives and MACH3?  If they will do you have any left and how much? letsonr@charter.net

[namnp2007]

Yes, I'm sure that these board can work with Yaskawa motor and Mach3( I used it about 3 years ago and they work fine untill now).

[letray]

Do you ave any of the boards for sale and what is you price with ics?

[Mred]

Where do I purchase a hillbilly bob? Thanks

[namnp2007]

@Mred & letran: You can purchase Hillbilli's BOB from Hillbilli, ofcouse, but I have some to sale . Plaese PM me about the price, or mail me at : namnp2007(at)gmail.com