Hello Guest it is May 04, 2025, 05:11:11 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Pot to stop axis  (Read 16025 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Pot to stop axis
« on: November 23, 2008, 06:56:03 PM »
For anyone interested I have made up a Brain so that if I turn my FRO pot to minimum it will feedhold  then when I turn up again it will start the code running again. Seems to work fine here but as usual test with caution and at your own risk ;)
Hood
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: Pot to stop axis
« Reply #1 on: November 24, 2008, 04:35:37 PM »
Heres another Brain that might be of use, it sets the FRO to 100% if the FRO is between 98 and 102%, stops the FRO LED constantly flashing and makes it easy to set pot to 100%.
Hood
Logged

Offline Chaoticone

*
  • *
  • 5,624 5,624
  • Precision Chaos
Re: Pot to stop axis
« Reply #2 on: November 24, 2008, 05:09:48 PM »
Those are great Hood. Just proof your not just another pretty face.  ;D

Brett
Logged
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: Pot to stop axis
« Reply #3 on: November 24, 2008, 05:14:18 PM »
:)

Hood
« Last Edit: November 24, 2008, 05:33:03 PM by Hood »
Logged

Offline budman68

*
  • *
  • 2,352 2,352
Re: Pot to stop axis
« Reply #4 on: November 24, 2008, 05:35:40 PM »
Just wanted to chime in here and say that even though I'm not utilizing these functions now, I do appreciate the info being here when I may need it.

Thanks so much, Hood-  :)

Dave
Logged
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: Pot to stop axis
« Reply #5 on: November 24, 2008, 05:40:52 PM »
no problems Dave, just want this for the lathe as it will be perfect for testing out new code especially now you can lock the rapids and FRO. Means you can slow right down or even stop as the tool is aproaching the stock.

Hood
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: Pot to stop axis
« Reply #6 on: November 30, 2008, 08:53:30 PM »
Have updated the Brain to do the same for the Spindle override as it does for the FRO.
Hood
Logged
Pages: 1   Go Up
« previous next »