Dobutton(21)

[olsson]

Hi there ,
    My name is olsson , I bought my license for the mach3 here in brazil , by "CNCBR" and I just start my application . I have one doubt  with my application I wrote one code for the button but that doesn't work , may be anyone can help me . You can see the code below.

Dobutton(21)
Activatesignal(7)

When I press the button once the mach reset , if I press again the charge pump signal is goes on but the output1 reaming off.
 
Thanks

[poppabear]

DoOEMButton(1021)
ActivateSignal(OUTPUT1)

NOTE: all your outputs are Killed if the Reset is active.......