There are lots of names i see here i know from CNCZone; but there are some i don't know
So i thought well post a pic and a link for those who might not have seen my builds
My Gantry mill
33" by 14" by 12" travels; VFD spindle (3/4HP) the taper is ER25 but I have made fixed length tooling too; The entire package is self contained; the computer (Sempron 3000+) and drives (3 x Zeta4) are contained in the box behind the Gantry bridge
During construction shot
Monitor and keyboard/mouse swing for veiwing and control is of course Mach3; there is a build thread on CNCZone about this machine; and there will be a webpage too; once i find time to make it
Here is the Mini Mill web page showing how i built this machine
webpage 
