My CNC Mini Mill and CNC Router

[trev36]

Hello all

Just wanted to share my excitement. I have just completed my CNC hobby router using my mini CNC mill and manual mini lathe.

http://www.cnchobbyrouter.com


Thanks

Travis

[Perfo]

Great looking set up and you've done a thourough job with the log as well. Do you find the X axis sags  a bit ? If so do you need to do some cunning compensations not to ruin your Z axis accuracies ?

[Hood]

Yes very nicely doccumented, I think it will be great help and inspiration for others

Hood

[budman68]

Posted by: Hood 

Yes very nicely doccumented, I think it will be great help and inspiration for others 

Indeed it will, thanks for the link as I'm hoping to build a nice cnc router at one point and yours is a very nice example. 

[trev36]

Thanks Hood , Budman68  and Perfo for the compliment.

Today I discovered I'm going to have to redesign the X axis as it has almost .070 sag to the center of the table. Very disappointed, but I'm going to redo it all the same. As it stands right now all it is good for is 2D cut outs.  Will keep an update at http://www.cnchobbyrouter.com on my progress.

Thanks again for all the support. Mach support forum really is the best.

Travis