New Router Screen

[Pythagoras]

Excellent !!! Thanks Scott.

Benny

[fjandot]

I've tryied this screen on my router.
All work well until my bit brake.

There is no  "Run from here" to restart in middle of program.

Another thing, to find the good line to restart, i'm used to jog in the programme and look at tool path to reach when the bit has broken. But in this screen, we could not have both at a time.


To resume, it's a very good screen to use with a touch screen until bit breaking.

[ger21]

There's a blank button that you could use for run from here. Just need to add a small DRO to enter the line number.

[benfly]

Here's a modified version of my other screen set for a single Z axis router.

 I haven't really tested it, but I think everything is working.

There is no toolpath on the Run screen. The reason for this is that CPU usage is about 75% lower without the toolpath on the screen, and when your cutting, you're usually looking at the machine, not the screen. This should make this screen run better on slower PC's than the standard screens.

Unzip all the .png files to Mach3\Bitmaps\Router\ and put the Router.set file in the mach3 folder. It's setup for spindle to use Output 1 and Coolant Output 2.

Let me know if there are any issues and I'll fix em up.

http://home.comcast.net/~cncwoodworker/CNC/Mach3/Screens/M3Router.zip

Also, here's the Real Draw Pro files if anyone wants to modify the Screens (you'll need RealDraw Pro).

http://home.comcast.net/~cncwoodworker/CNC/Mach3/Screens/M3Router_RealDraw_Pro.zip

So, how do I change from inches to mm in this screenset?

[ger21]

Use the MDI, G21