Spindle Contactor Brain, with Delay.........

[poppabear]

A user had a question on if he wants his m3 and m4 to set a direction output first, then a delay then another output to pull in a contactor, for a larger machine.
Here is a "Brain" that does it.
If using Output1 as your M3, Output2 as M4, and Output3 to pull in your contactor.
Under Ports and Pins, under the spindle tab, you will have to enable "relays" Output1 for M3, and Output2 for M4.
Leave the M3, 4, and 5 macro's in thier original states so they wont conflict with the brain.
The "Timer" delay is set to "1" second you can use Brian editor to modify the timer.

Brain attached,

Scott