Jog Buttons won't work on one of my screens..........hmmmm

[Darc]

Any idea why for some reason the jog buttons (arrows on keyboard) won't work on one of my screens?
If I start Mach, enable drives, Home machine, the check Jog Enabled is On and set to either Step or Continuous, it just won't move, but if I load another screen, without changing anything else. The jogging works correctly.
I remember having this a while ago, I ended up giving up and restarting the screen, but the screen I've got now, I've been working on for about 2 months, there's ALOT of code in it.
So preferably I'd like to try to figure out how to fix it, rather than copy/paste.
Thanks.
Darc

[poppabear]

If you want, send the screen to me, and I will see if I can find the issue........

state the page the issue exist on too.

NOTE" there HAS to be a jog button with LED on a page that your trying to jog from

[Darc]

Well, I finally found out what is happening, the problem only rears it's ugly head when the JOG ON/OFF is set to "Display on all screens"
It's good to finally know what's going on.