LazyTurn

[Overloaded]

I'm all for the stationary tool display as well.
RC

[ART]

Hi Rich:

 Ill stop the tool rotation, I just needed to see the side of it while debuigging..

 The radius setting is just a reminder of the tool radius, but Ill make it perist to your last cut.
The inscibed circle is set to a minimum of .1 , I cant see any tool having an inscribed radius that small myself, that means the entire tool is only .2" wide at a maximum if the inscribed circle is .1

Art

[Graham Waterworth]

Hi Art,

Just to throw a spanner in the works 

I use tools with an IC of .0196", they are for forming small radii grooves.

Graham