Profile Shapes Wizard

[poppabear]

Here is a Link to the "Profile Shapes Wizard" Screen it has quick pick buttons for:

Ellipse/Circle, Rectangle, Triangle, Octagon, Pentagon, Hexagon, and  Multi-sided Polygon (as long as the number of side go evenly into 360deg)

This Simple Wizard cuts the center of the tool along the shape, so if you want to offset it in or out, you will need to edit in your G41/42 depending on direction, or just make your Profile One Tool Radius smaller or Larger than the hole you want to cut.

http://www.machsupport.com/forum/index.php/topic,3888.0.html

It is post #1, and the Zip is "Profile Shapes Ver 2.0.1.zip"

Also, I reposted the Zip file here for your convenance.

Scott

[poppabear]

Here is the Profile Wizard updated with the ability to offset your Tool to the inside or outside of the profile.

Scott