******Guess and win a G100 Grex******

[RFord]

Based on the volume of the material left (ML) and making an assumption of the size of the material at start (MS).  Then applying the formula.....    WTF = MS-ML... and facturing in what appears to be a single flute spiral upcut end mill (EM) and the speed of the mill (RPM) factured be the feed of the tool (FR)  WTF = MS-ML/EM X RPM/FR  The final answer is WTF = 2,363,673

[lenf]

As the chips are down I would guess 2,607,726

[chizman]

For lack of a witty comment that hasn't already been thought of or submitted.....
I guess 2,304,587

[escowizard]

Well here goes..........  2,873,589 chips.          lol and I bet I am only off by 3%


Scott L Golden.............love Mach 3       & Geck0 s         !!!!!!!!!!!!!!!!!!!!!!!!!!!   

[mike209]

My guess is 2,798,212

[JFettig]

2.844245E-6

[Chip]

Hi, All

Until I do a re-count, it's 2,760,082, There's some pretty small chip's in there, My eye's hurt now.

Hope I'm Close, Chip

Who's going to do the re-count, Could be some hanging chip's/chad's in there.

[nitaguru]

My guess: 2,028,028.
Nita

[Alan T.]

Based strickly on a number pulled out of the air, my guess is 2,475,027 chips,  (give or take a couple)

[fred3137]

My guess is 2,777,789