I am an old timer who has been to the CNC WORKSHOP and lived with MACH3 CNC for years.
My problem just started occuring the other day, and I am tearing out what little hair I have left.
I am probably the guilt party on this problem as the machine was running perfectly until yesterday.
When I started the Machine and computer up yesterday, my problem began. When I hit reference all, the Z and Y axis zero out perfectly. The X axis is not referencing out and when it does it stops at the limit switch ,AND INDICATES A VALUE X=-0.0219 TRIGGERING A RESET. If I reset the x limit switch and attempt to reference the X axis it moves to the limit switch and now will show a value X = -0.0439. If I do it again it will give me a reading of X=-0.0658 or an increase of -0.02195.
I understand that the machine is getting this value from some register, and I cannot figure out the solution. If any of the hero's out there can help me I would be very appreciative.