NEW!! Drill Wizard

[Ron Ginger]

I dont quite understand your question.

It doe snot matter which wizard update you install first. They are completely unrelated.

I assume your shop computer is not connected to the net and you do the download on another computer, then copy the files to flash drive and take that to the shop computer.

If the shop PC is on the net just download the files to a convenient place, like the desktop, then unzip it to the Mach3\Addons folder.

[bob b]

thanks ron you got me straightened out

[Racer]

Hi Ron,

I like this Wizard.

There is no place to put the spindle speed, or I can't find it. On your video I see it, but not on the one I installed V1.02.

Thanks

Jerry

[Ron Ginger]

Yrs, I goofed and put the DRO for RPM there instead of the one for Spindles speed input. Ill fix that next release.

[Kennyd]

Ron, I found another small problem (may have been discussed but I did not see it in this or other threads)

Look at the picture carefully below, the X button is mis-labeled as "ZeroZ".  This is in v1.02