Now that I have a bit of time under my belt with Mach3 I made the decision to employ a Logitech Dual Action Game Controller and was successful with mapping the controller with the functionality desired using KeyGrabber. That's the good part...! Emboldened... I began to play with MachScreen to simplify the 1024 Page 1 screen. So... I created my simplified screen by heavily modifying Page 1 of the 1024 screenset. This was also a success on first blush... the screen worked well however... when I attempted to employ the game controllers D-pad which I have mapped to the keyboards Left,Right, Up & Down arrow keys and buttons 4 & 2, which I have mapped to the keyboards Page Up & Page Down keys... they are non-functioning. Even the keyboard's Left,Right, Up & Down arrow keys and Page Up & Page Down keys do not work...! Everything else works fine on the keyboard & game controller.
Going back to the standard 1024 screenset re-enables the keyboard's & game controllers FULL functionality. So here's the question... it is obvious that SOMETHING having to do with the keyboard's Left,Right, Up & Down arrow keys and Page Up & Page Down keys has NOT been carried into my modified simplified Page 1 screen. After several frustrating hours attempting to suss out a remedy... I've no idea how to go about troubleshooting this.
I hope I've given sufficient info on the problem... ANY ideas what I might do to reenable these nonfunctioning keys and get them back to working on my simplified screen...
BOOMER52
Machsupport Forum
