keyboard shortcuts

[Workinforwood]

I'm very new, so I know nothing. I was working on phone with a friend and he was discussing short cuts on keyboard. He said hit esc, that's same as reset. I hit escape nothing happens. He also said arrow keys, or page up down will control the mill head, but I try that and nothing happens. I did however get the pendant to come on screen by hitting the tab button. I guess I need the pendant to locate the machine zero, but by using the mouse and the pendant controls, I can't control the machine very well, like it moves down too fast and he says with the keyboard I should be able to be lowering the machine head a thousands or 2 at a time. Is the keyboard shortcuts something I have to configure somewhere? btw, the machine is Syil X5. Thank you.

[ger21]

Escape is not reset, the key below it is. "~"

The arrow keys should jog the machine by default. However, if you have a pendant, you are probably in MPG mode. You'll need to switch to a jog mode for the keys to work.
You can change the jog keys using Config> Hotkeys.

[Workinforwood]

Thanx, I try that on Tues when get back home