Is there a way to Independently move an axis while moving others?

[docltf]

if you have your motors tuned well and the radius for A axis set to the diameter of the material.the cut will
seem continuous without the use of the CV command.

this code works well if your machine is tuned.
G01 X10 A1800
G01 X0 A3600

bill

[Sargon]

you can do a "Swap Axis" VB command and swap your Spindle (which is constant velocity), and your A axis.

I had no idea spindle was available to be swapped!

Thanks for that!

Chris