Need help with collet closer macro

[GytarrMann19]

Hello all,

I'm getting the air-operated collet closer working on my lathe. I have written the following macro, and it is working:

M101 (open collet) DeActivateSignal(Output5)
                           ActivateSignal(Output4)

M102 (close collet) DeActivateSignal(Output4)
                           ActivateSignal(Output5)

I would like to add something to the open macro to prevent the collet opening when M3/M4 are active. Just as a safety precaution I guess.

How do I do this?

Thanks,

Kevin

[Hood]

Something like this would maybe suit.
If GetOEMLED(11) Then
End
Else
DeActivateSignal(OutPut5)
ActivateSignal(OutPut4)
End If

That should look at the spindle LED and if its on will end the macro, if not it will do your outputs.
Hood

[GytarrMann19]

Thanks, Hood.

Worked perfectly.

Kevin

[Hood]

No problem
Hood