Welcome, Guest. Please login or register.
Did you miss your activation email?
May 27, 2012, 11:10:10 PM

Login with username, password and session length
Search:     Advanced search
* Home Help Search Calendar Links Login Register
+  Machsupport Forum
|-+  Mach Discussion
| |-+  General Mach Discussion
| | |-+  problems with spindle run on my CNC
Pages: 1 2 »   Go Down
« previous next »
Print
Author Topic: problems with spindle run on my CNC  (Read 342 times)
0 Members and 1 Guest are viewing this topic.
dinko
Active Member

Offline Offline

Posts: 11



View Profile
« on: June 11, 2011, 11:51:05 AM »
Greetings !!

I have poblems with Connections/Setup on mach 3 with spindle:

i have 4 ports on LPT conroler that i can on/off my electric things.

RELAY1= P1
RELAY2= P16
Pump= P17

Spindle =P14
Spindle speed =P14* i thing i need to regulte extra electronics...

so i need help to setup my MACH3 to on/off my spindle and where to connect

THANKS!!


p.s. : sorry about my english
Logged
Hood
Active Member

Offline Offline

Posts: 17,366


Carnoustie, Scotland


View Profile
« Reply #1 on: June 11, 2011, 12:05:50 PM »
How are you controlling your spindle speed? What kind of spindle/drive is it?
Hood
Logged
dinko
Active Member

Offline Offline

Posts: 11



View Profile
« Reply #2 on: June 11, 2011, 12:20:25 PM »
I have controled speed witout electronics... i need just off/on.. so i need only when start maching to turn on spindel and when its done spindel off. no need to regulate speed

TNX
Logged
Hood
Active Member

Offline Offline

Posts: 17,366


Carnoustie, Scotland


View Profile
« Reply #3 on: June 11, 2011, 12:34:30 PM »
Ok so you only need one output to turn On/Off the spindle via a relay.
Hood
Logged
dinko
Active Member

Offline Offline

Posts: 11



View Profile
« Reply #4 on: June 11, 2011, 01:04:23 PM »
i setup on:

Config>Ports and pins
Output signals:

on output#1 :Chacked | 1 | 14 | active


but doesent work nothing

or if i must work on something other setup ??
Logged
Hood
Active Member

Offline Offline

Posts: 17,366


Carnoustie, Scotland


View Profile
« Reply #5 on: June 11, 2011, 01:11:19 PM »
Config, Ports and Pins, Spindle Setup and uncheck "Disable Spindle Relays" and enter 1 for M3. see pic.
Hood

* ScreenHunter_01 Jun. 11 19.10.jpg (84.62 KB, 739x490 - viewed 27 times.)
Logged
dinko
Active Member

Offline Offline

Posts: 11



View Profile
« Reply #6 on: June 11, 2011, 01:18:58 PM »
i have this seting like you show and i change settings like i saw on video on mach3

output#1 : cahcek | 1 | 1 | active and still dont work...
Logged
Hood
Active Member

Offline Offline

Posts: 17,366


Carnoustie, Scotland


View Profile
« Reply #7 on: June 11, 2011, 01:19:59 PM »
Can you attach your xml please and I will see if I can find a problem.
Hood
Logged
dinko
Active Member

Offline Offline

Posts: 11



View Profile
« Reply #8 on: June 11, 2011, 01:36:33 PM »
I hope it will work

tnx
* Mach3Mill-robby.xml (146.7 KB - downloaded 11 times.)
Logged
Hood
Active Member

Offline Offline

Posts: 17,366


Carnoustie, Scotland


View Profile
« Reply #9 on: June 11, 2011, 01:39:34 PM »
Sent you a PM
Hood
Logged
Pages: 1 2 »   Go Up
Print
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!