Compumotor servo drives for conversion?

[catch22]

I have a small cnc mill that I built and I use the compumotor zeta4 stepper drives and bipolar stepper motors.
They are great drives and I was wondering if anyone has used there servo drives with Mach3 and how they worked out because I would like to try them in my
cnc Mill conversion if they are compatible.

Thanks Mike

[Hood]

If the Compumotor drives can accept Step/Dir input then they should be fine. If they are analogue input then you would need something like the DSPMC, kflop/Kanalog, Galil or lastly YASPC to control them Via Mach.
Hood

[catch22]

Yes some do take step and direction.

Thanks Mike