PC won't boot up

[Overloaded]

Hey Jeff,
  Not much info seen on the mobo, just  663ASPRO  Rev:1.2

Anyway, I pushed the impeller off of the fan (thought for sure I would break it) but it popped apart, then I put a drop of oil on the shaft and reassembled it.
It spins now like a raped ape and the PC runs OK now.
Now that it's running, I'll make note of the info.
Thanks Jeff,

Hood, the other 2 fans I tried were 3 wire as the original, tried on the original header. Thet were all 12v but the amps were all different. Maybe that's why they wouldnt work. I didn't realise the mobo gets feedback from the fan, good I guess.
A little lube is good for lod stuff.
All is good for now.
Thanks,
Russ

[Hood]

Russ, google tells you its a Jetway mobo. Glad its going now
Hood

[ostie01]

Hi,


Is this the manual for your mobo.

If it is, could be useful to keep a copy on hand.

Happy it was so simple and you make it work

Jeff

[Overloaded]

Thanks guys, yes Jeff, that looks like it !
This is an antique lol, I expected the manual to be chiseled on a stone tablet.
Moer info there than I expected.
See the fan stuff too, amazing.
Thanks again men,
Russ

[ostie01]

I still have a Tandy 1000HX from radio shack, paid $2500.00, don't remember what year it was.

It have a huge 56K memory

But I lost my VIC20 and my TRS80.

Jeff