I received the following email reply from Midwest Rapid Tool Inc., Including a pdf file. Thought I'd pass it on.
This ATC will work with Mach3. I have created all the macros and VB
code required. I also created a screen set to help setup the Tool
Changer and keep track of the Tool Holders and Tool offsets. I have
included the setup instructions for you to review.
The bundled price includes everything you need to do automatic tool
changes. This includes a modified Porter Cable 7518 router mounted on
a backplate with an air cylinder, solenoid, and control module, an
eight station tool pallet, and router control module (turns router
on/off as required), four tool holders (w/collet nuts) and 4 collets
(your choice of size). The cost for additional tool holders is $55
each. We are located about 30mi west of Chicago in Batavia, Il.
Please let me know if you have any other questions or comments.
Thanks
Haze Avery
Midwest Rapid Tool Inc.
www.midwestrapidtool.comhaze@midwestrapidtool.com
Machsupport Forum
