OEM LED codes for Output7 - Output20

[JHChoppers]

Are there OEM LED codes for the higher numbered Outputs?  Can't seem to find them anywhere?

Mainly Output20, 19, 18 and 17

Thanks,
JH

[Hood]

Not as far as I know. You could use a Brain to set a user LED if you wished.
Hood

[JHChoppers]

Bummer.... and thanks hood

[poppabear]

Hey JH,

     Here is a Solution for your issue, the missing I and O LEDs in the upper ranges has been an issue for a long time.

http://www.machsupport.com/forum/index.php/topic,10861.0.html

That is a Plugin that Maps ALL the missing Inputs and Outputs to LEDs, it is the "Standard OEM" Mach Mill screen, but I Modified the Diagnostic screen with the Missing LEDs.

It does this, and uses these resources:

Inputs:
1).   OEMTrigger's 1-15

Outputs:
1).   OUTPUT's 7-20
2).   Charge Pump, Charge Pump2, and Current Hi/Low

ULED's Used for Input Signals are:
1).    1301-15 is used for OEM trigs 1-15
 
ULED's Used for Output Signals are:
1).    1316-32 is used for Outputs 7-15,Charge Pump,
   Charge Pump2 and Current Hi/Low

Also, if your doing alot of R & D, or customizing, look into Mach MAD, it was built for just that........

scott

[JHChoppers]

Thanks Scott !

I mapped them to user LEDs and updated my macroPump to read to output states and update the LEDs.  But I like this better!

What is Mach MAD ?

JH

[Promech]

http://homanndesigns.com/store/index.php?main_page=product_info&cPath=7&products_id=62