No Toolpath

[zealous]

sorry for the delay I was out of town.

Here is a basic layout of toolpath,Gcode,labels and buttons to test out and look at.
This allows to add multiple lines to the Gcode in the "component inspector" using "Row Count"
This is saved in CS3.
Updates are here: http://www.machsupport.com/forum/index.php/topic,10291.0.html

[zealous]

I just installed Version R3.043.019 and everything is working.

[ger21]

Brian said it should be working, so I reinstalled it and it does. Wierd. Thanks