Setting machine Coordinates

• The X-near and X-far (slaved axis) work in normal mode together. But if I want to “ref all home” On the “
Program Run Alt1” page. The MM seeks the Z-home, the Y-home, but on the X axis, only the X near motor is turning, the X Far motor won’t turn WHY.

• The arrow keys on the key board to move the axis (XYZ) don’t work sometimes. I must press the wrong something. The Jog On/Off (Ctrl ALT J) is green and the Fly out work when I click it with the mouse to move the axis. The only way I can get out is to re-start the program.

• My Y –axis is moving Right and counting up (that is how I want it), but I must used the Left key-board button to move to the right. In the literature they said “This is done by selecting System Hotkeys in the config menu”…..I tried it many ways, but it don’t work.