master cam to mach3 turn

[jekran]

i notice that in mach3 turn when i bup up the feed rate while it is in g1 it will set after a g0 do you know why ?

No FRO on Queue option set?

Hood

i did try it but with no luck the only thing that i set was (look ahead 20lines) i adjust it to 1 and then after that code line it will bup up but you still have to wait for the other line then

[Hood]

Can you attach your xml please.
Hood

[jekran]

how can i upload a XML file i made a copy with a pendrive but i dint know how to upload in the forum  page

[jekran]

i think here is the file

[Hood]

Ok first thing is uncheck No FRO on Queue
Then if it still doesnt work then I think you may have an issue with the screenset as I can adjust the FRO no problem with my own screenset but the standard Turn one doesnt seem to work.
Will have a look see if I can find the issue with the standard screenset.
Hood

[Hood]

Ok seems to be the OEM for increment feedrate that the turn screen uses are acting weird. On my screen I use OEM108 and OEM109 and it works as it should so try this screenset and see if it works.
Hood

[jekran]

dear hood
it worked perfect !!!!!!!!!
many thanks for your help

[Hood]

No probs, will note this down and make sure that when/if Brian ever gets on to Rev4 Turn it will be fixed.
Hood