Jog VS G00 Performance

[sgoedvolk]

With a jog we can easily get 50 IPM, with G00 best we can do is 17 IPM! Any suggestions what could cause this and how to fix.

Thanks!
Shane

[RICH]

If i recall corrrectly you are limited by the max velocity, so when jogging at 100% or G0 (a rapid move) you can go only to max velocity.
Irrelavant, you would only continuosly jog or rapid at a rate such that you are not missing steps. With steppers anyway....

There is a feedrate can be overiden from 20 to around 300% by putting a percenatge into the DRO, maybe that's what you have and didn't realize it,
but the Led will light up warning you. Same practical comment made above would still apply.


RICH

[BR549]

Check to make sure your rapid (G0) overide is at 100%. As you have noticed JOG and G0 are too different things in mach.