Welcome, Guest. Please login or register.
Did you miss your activation email?
May 25, 2012, 09:28:41 PM

Login with username, password and session length
Search:     Advanced search
* Home Help Search Calendar Links Login Register
+  Machsupport Forum
|-+  Mach Discussion
| |-+  VB and the development of wizards
| | |-+  Mach 3 Turn Wizards
Pages: 1   Go Down
« previous next »
Print
Author Topic: Mach 3 Turn Wizards  (Read 716 times)
0 Members and 1 Guest are viewing this topic.
bazzag
Holding

Offline Offline

Posts: 1


View Profile
« on: February 22, 2010, 04:35:49 AM »
Just started using Mach3 on a CNC lathe. I am having problems when running G Code created using the lathe turning wizards. I have found that the M3 generated by the wizard does not activate the dwell I have set for the spindle and the spindle eventually stops during execution of the G Code. If I edit the M3 to M4 and save the G Code, eveything runs as expected.
Anyone experienced this or have any clues to what is going on.

Bazzag
Logged
zarzul
Active Member

Offline Offline

Posts: 273


Wyoming, USA


View Profile
« Reply #1 on: March 02, 2010, 12:36:17 PM »
go into the configuration - ports & pins - spindle - change the m3 & m4 output#'s
or go to the outputs and change the pin numbers for outputs, usually #1 & #2  to correspond to your machine.
Logged
Pages: 1   Go Up
Print
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!