Hello Guest it is November 17, 2019, 08:54:16 PM

Author Topic: LAZYCAM MANUAL  (Read 18127 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,371 7,371
    • View Profile
LAZYCAM MANUAL
« on: July 17, 2009, 04:03:44 PM »
LAZYCAM MANUAL _ REV 1

The manual  covers the Mill and Lathe modules and may be updated in the future to add additional tutorials.
The attached DXF files were used for the manual.

There is a revison listing aand also a known BUGS listing at the end of the manual.
 
RICH



  
 
« Last Edit: August 18, 2009, 07:23:37 PM by RICH »

Offline RICH

*
  • *
  •  7,371 7,371
    • View Profile
Re: LAZYCAM MANUAL
« Reply #1 on: September 11, 2010, 10:20:27 PM »
Here is a basic tutorial for creating tabs in LazyCam. The tutorial wil become part of the LazyCam Manual when it is revised
and this post will be deleted at that time.

RICH

Offline RICH

*
  • *
  •  7,371 7,371
    • View Profile
Re: LAZYCAM MANUAL
« Reply #2 on: September 08, 2011, 06:38:48 PM »
Test of a video on how to cut a profile.
RICH