smooth stepper port 2 pin assignment

[pedro]

hello,

it is not cler to me if I manage the port 2 as 13 input and 4 output configuration wich pins will be assigned to output. Sorry if the question seems dummy but it is not realy clear to me

Thanks in advance for the help

[Hood]

Same as the parallel port, 1, 14, 16, 17

Hood

[pedro]

thanks   

[hunserv]

On the SS website an old documentation is available only...

Can someone tell me the PINOUT for the SS board?
I mean if I set PIN x on mach, which PIN on the SS connector will be affected.

On the docu. one of the connectors is numbered but to me it looks odd, those connectors usually use PIN1 on the opposite side (at least with floppy drives as I recall...)

So what I need is a consistent chart for PIN numbering on the SS board, and MACH pin numbering...

Anyone can help???
****
OK, Not an issue anymore, As I made a few measurements it seems pinout is as written on SS manual... Problem solved from my side.