2.83 ready

[Ron Ginger]

I fixed a couple more issues related to the new cutter comp, and a couple related to the use of tool zero and not putting the tool change info in code correctly.

As usual Ill post this here, I hope some of you try it and let me know of any errors. If no problems are found in a couple weeks Ill pass it to Brian to include in the release mach kit.

Update: I just replaced V2.83 with a very minor change.  The original still put the comment in the code that said v2.82. I wont change the v number for so minor a fix, but the code is changed as of  this edit

[MikeHenry]

Ron,

Will there be a separate version for the Tormach mill?

Mike

[Ron Ginger]

No, not needed now. I fixed that in 2.82 so that the wizard figures out the path name.

[MikeHenry]

Thanks Ron - Mike

[Greolt]

Ron

Have not had a chance to run any wizards yet but one small thing you might want to fix.

The position of the Inch/MM LEDs which "show on all screens" conflicts with some of the other graphics.

Most notably the electrical shapes page and less so the choose operation page.

Pedantic I know.  

Greg

[RICH]

Ron,
Should MACH VER 3.043.00 be installed before using 283 version???
I'm workring my way up the ladder to 3.043 but seem to keep missing a
wrung on the ladder trying to get there. 
RICH

[Ron Ginger]

I know about the inch/mm LEDs, its the best I could do since I added them on after all the screens were designed.

The mach version should not matter, as long as its fairly recent- the last year is probably OK. What I fixed for the comp moves was to always make a linear move for the comp exit. That was always OK, after the recent fix its mandatory. So the wizard generated code will run with the old comp fine.

[N4NV]

A very minor issue.  When posting the code the second line is:

(Version 2.82)

I just want to make sure I am using version 2.83.  The program indicates V2.83.

Vince

[N4NV]

Another issue.  When changing screens, sometimes the last DRO edited shows up behind the current screen. 

Vince

[Ron Ginger]

That must be some kind of processor or graphics card issue. Nothing in VB or wizards has any control over the display updating. Are you running on a very slow cpu?