Mach Components AGD

[zealous]

Here is the beta release of the Mach Compontnets 1.0

Please post back feed back here or send me an email: support@alphagraphicdesigns.com

If you use them please help support future development by buying Pack2 from Alphagraphicdesigns.com.

Once they are available for purchase there will be a number of enhancements and additions.

**The beta version can only be used for hobbies and cannot be resold or distributed and are intended for evaluation purposes.

Video on how they work:

The video is here:
http://alphagraphicdesigns.com/help/Quantum/MachComponents1.0.1.wmv

Components (FLA):
http://alphagraphicdesigns.com/Download/MachCompontnes_beta_1.0.zip

Please also check out a fully developed screen from Mach Motion (components in action ):
http://alphagraphicdesigns.com/machmotion/test/MM_demo.html

[zealous]

I have had a couple request for versions later then CS3.
Here is the location for users of MX2004 - Flash 8 otherwise if you are using CS2-CS4 download the above.

http://alphagraphicdesigns.com/Download/MachCompontnes_beta_1.0F8.zip

[billman311]

Hi, GREAT COMPONENT SET!!!!!

But i have a question about the gcode window. I place it on the stage with other objects (just to test some things) and load a .TAP file. I can see the code just fine. But if i navigate to the next frame, and then back to the first one... the code is gone 

Is their some actionscript i need to view the code again, once i move back to the gcode key frame?

[zealous]

Yes that is true, you will need to have the Gcode on each page. You can place it off the "Stage" out of view.
I can update the Gcode so you don't have to do that, but will not be able to get to it till next month.

[billman311]

Thanx for the reply!

I will give it a try!

**UPDATE**

Yup, it worked fine, i will just hide it when not in use. 

[ger21]

I'm going to buy this just for the g-code window, but have a few questions first.

1) I can't seem to get more than 12 lines of g-code. It looks like the spacing is to great and the bottoms start to get cut off. Font Size doesn't seem to have any effect below 10-12 (not sure exactly). I've been playing with it for two hours, and every combination I came up with does basically the same thing. I'd like to squeeze 20-25 lines of code in the same space.

2) Is there an easier way to pick a background color? It's nearly impossible to pick white. And on a related note, what about greyscale? I wouldn't need white if I could pick a shade of grey.

Thanks, Jason.

[zealous]

Sorry for the delay, I attached a new Gcode component and test screen.
You can set the line number and spacing as well as select colors using a normal color picker.

[ger21]

Thanks, I'll try it tonight.

[ger21]

Jason, it won't open in CS3. Says "Unexpected file format".

[ger21]

bump